Description

Birla Opus C2K Cementitious Waterproofing 15KG

Birla Opus C2K Cementitious Waterproofing 15KG is a two-component acrylic cementitious, polymer modified elastomeric waterproof coating. It is composed of cement with properly graded sand and selected additives as one part & an acrylic emulsion as a binder in its second part. It is applied for protection & waterproofing of concrete and masonry substrates.

PRODUCT DETAILS Birla Opus C2K Cementitious Waterproofing 15KG:

• AVAILABLE PACKS: 15kg.

COVERAGE:

Estimated forced coverage 7 – 8 sq.ft/kg for 2 coats**, Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity. One should ensure coverage is not higher than the one prescribed above for optimal performance.

SHELF LIFE:

12 months from the date of manufacture.

AREAS OF APPLICATION OF Birla Opus C2K Cementitious Waterproofing 15KG:

• Old & New Concrete, Plaster & Masonry surfaces.
• Wet Areas – Bathrooms, Kitchens, Balconies.
• RCC roofs, Small terraces, chhajjas & sinks.
• Concrete Water Tanks.

MIXING & APPLICATION:

• Birla Opus Prime C2K liquid component must be shaken thoroughly before mixing.
• In a mixing vessel, slowly add the powder component into the liquid (1 part liquid : 2 part powder) with continuous stirring. In case of bulk volume, use mechanical mixer. Continue to stir until a homogenous, lump free mix is achieved. Allow the mix to stand for 3 – 5 mins to release entrapped air during mixing.
• Apply 1st coat of the mixed slurry using brush on SSD (saturated surface dry) surface. Make sure that the application is done correctly in areas where the surface shows minor abnormalities or undulations. Add an extra 1-2 feet of mixed slurry to all sides of the affected area.
• After 4 – 6 hours, apply 2nd coat in the direction perpendicular to the 1st coat.
• Leave the coating to air cure for 2 – 3 days. Then apply plaster or screed.
• Prepare 1:3 Screed mixture (50 kg of cement to be mixed 150 kg sand). Screed thickness should be a minimum of 15 mm to 30 mm. It needs 48 hrs of air curing followed by minimum 4 days of water curing.
• Apply 2 coats of Product on all over shower area. Sprinkle coarse quatrz sand while second coat is still wet. This will provide better adhesion for subsequent tile adhesive materials.

Top Trending Keywords:

Birla Opus C2K waterproofing price online | Cement-based waterproofing for terraces and roofs | Birla cementitious waterproofing for leakage repair | 15KG waterproof coating for home construction | Birla Opus Prime Waterproofing | Birla waterproofing product reviews and application guide | Affordable two-component waterproofing solutions | Constro Chem | Cementitious waterproofing products for terrace leakage | Birla Opus C2K.